Create Your Own Stamping Dies With Stamping Part

Stamping dies are usually used to create Stamping Part. Sheet metal parts retain their shape because of the die tooling process. Materials such as sheet metal stamping die can be used in different kinds of craftsmanship. They can also be used to make designs for wood, metal and leather. Stamping dies are used by furniture makers to add detail to the piece of wooden or metal furniture. Forming sheet metal stamping die can be challenging but it often takes practice to get the desired results. Once you learn how to do it, you will have your own signature design for your future crafts. You can buy sheet metal from a roofing supplier in Brisbane.

Make your own design of stamping die by drawing it on paper. You need to have 2 copies of your drawing. You can photocopy the original drawing. Trace your drawing using a pencil and carbon paper on the sheet metal surface. Use saw to cut 2 pieces of sheet metal. Make sure that they are of the same size before gluing them together. Cut out the design of the die using a jewel saw. Use file to smoothen the edges. It's time to separate your 2 pieces of sheet metal. Pour acetone on the glue to remove. They should be the same size as the sheet metal. File and polish edges until they become smooth to the touch.

Insert the brass wire into the holes. Cut wire ends and rivet sheet metal pieces and acrylic sheets with the riveting hammer. Take off the masking tape from earlier step. Remove glue or tape residue on the stamping die by wiping off with acetone. The sheet metal stamping die is ready. It will be used together with a hydraulic press to make embossed designs on leather, metallic, paper and wood surfaces. Be careful in filing and polishing the edges of stamping die. They should remain smooth to prevent damage to the surfaces. When you run out of metal, take a look at roofing supplies in Brisbane for more craft ideas.

Related Reading: MBBS In China  Auto Lamp Factory